Epson TM-U220B Impact Printer Ethernet

A Robust, High Performance Kitchen Printer

The Epson TM-U220B is an exceptionally easy to use impact receipt printer. It features drop-in paper load, auto-cutter and clamshell covers for easy access and maintenance. The TM-U220 impact printer is very reliable and prints on bond paper in three widths. Its compact design saves space in your kitchen and is also wall-mountable. The built-in processing power/memory offers greater flexibility and efficiency. The special print option feature reduces paper usage up to 30 percent.

Features

• Reliable, durable kitchen printer
• Low power consumption
• Reliable kitchen/video display controller and printer in one device
• 2 USB ports and Ethernet connectivity
• Reduce paper usage up to 30%
• Flexible paper width
• Drop-in paper load
• Auto-cutter included
• High-speed printing
• Space saving/small footprint
• Wall-mountable with optional kit
• Cover open sensor
• Paper near end sensor
• End of paper roll sensor
• Online ordering ready
• Clamshell cover for easy access and maintenance

Includes

• TM-U220B impact printer
• Power supply
• Ink ribbon
• Starter paper roll
• User manual

Add-Ons

• Paper Rolls
• Ink Ribbons
• Wall hanging bracket

Click Here to View: TM-U220B Data Sheet

Specifications:

Weight Approx: 5 lbs

Dimensions: 6.29″W x 9.76″D x 5.45″H

Contact Us

Frequently Asked Questions:

How do I load paper roll?

NOTE: Be sure to use bond paper rolls or carbonless paper rolls.

CAUTION: Be sure not to touch the manual cutter. Otherwise your fingers might be injured.

1. Open the roll paper cover by using the tab

2. Insert the roll paper (with the paper feeding under and not over).  NOTE: When using 2-ply roll paper, be sure that the top and bottom sheets are aligned at the paper exit.

3.  Pull out some paper, close it, and tear off the excess.

4. Drop paper roll in. If you are not using a take-up spool, pull out some paper and close the roll paper cover; then tear off the paper with the manual cutter.

How do I insert and replace the ink ribbon?

NOTE:

The print head becomes very hot during printing. Allow it to cool before you replace the ribbon cassette.

CAUTION:

Never turn the ribbon cassette’s feed knob in the opposite direction of the arrow marked on the cassette; otherwise the ribbon cassette may be damaged.

**Make sure to use the EPSON ERC-38 ribbon cassette for your printer.

1. Open the ribbon cassette cover by using the tabs on the sides of the cover.

2. You’re going to want to make sure you twist the knob on ink ribbon clockwise to tighten the ribbon. That way nothing twists inside the printer.

3. Insert the ribbon (place it in with the ribbon behind the print head, facing the paper roll side , and the knob facing upward. Push the ribbon cassette down until you hear a click.

Note: Make sure the ribbon is installed between the print head and the platen without wrinkles or creases.

4. Again turn the ribbon cassette’s knob 2 or 3 times in the direction of the arrow and close the ribbon cassette cover.

CAUTION:

Be careful not to touch the print head with your fingers when turning the ribbon cassette knob because the print head is hot and you might be burned. When you replace the ribbon cassette, lift the left side of the ribbon cassette first; then lift the whole ribbon cassette.